Buyer's Guide
XLPE vs PVC Insulated Cable: Which One for Your Project?
Short answer: choose XLPE for power distribution, medium voltage, hot climates and any feeder where current capacity matters. Choose PVC for low-voltage building wiring and control circuits where flexibility and price come first.
Side-by-side comparison
| Property | XLPE | PVC |
|---|---|---|
| Max. conductor temperature (continuous) | 90 °C | 70 °C |
| Short-circuit temperature | 250 °C | 160 °C (≤300 mm²) |
| Current capacity, same cross-section | Calculate for the installation | Baseline |
| Typical voltage range | 0.6/1 kV up to 35 kV and above | Mainly 0.6/1 kV and below |
| Dielectric losses | Low | Higher |
| Moisture & chemical resistance | Very good | Good |
| Flexibility & ease of installation | Stiffer | More flexible |
| Halogen-free option | Yes (XLPE + LSZH sheath) | No — PVC contains chlorine |
| Unit cost | Slightly higher | Lower |
| Typical standards | IEC 60502-1/-2, GB/T 12706 | IEC 60502-1, IEC 60227 |
Typical examples, not a specification for every cable compound. Confirm ratings in the exact product datasheet and applicable standard. Size cable to local code and installation conditions.
A simple selection rule
- For medium-voltage feeders, review XLPE.
- For hot or grouped installations, calculate derating before selecting XLPE.
- For smoke-sensitive building zones, review XLPE with LSZH sheath.
- For approved low-voltage wiring and control duties, review PVC against the exact fire and installation requirements.
Frequently asked questions
Can I replace PVC cable with XLPE of the same size?
Not automatically. Check ampacity, voltage drop, short-circuit duty, terminations, installation method and local approval requirements. Do not reduce conductor size based only on the insulation material.
Is XLPE cable more expensive than PVC?
Compare project-specific quotations. Conductor material, cross-section, armour, sheath, testing and installation cost all matter; insulation alone does not establish the lower installed cost.
Which is better for hot climates like Indonesia, Vietnam or the Middle East?
XLPE. Its 90 °C rating gives more headroom when ambient and ground temperatures are high, reducing derating losses.
When is PVC still the right choice?
Low-voltage building wiring, control cables and short final circuits where flexibility and low cost matter more than current capacity.
CTT products for each case
- YJV — XLPE copper power cable
- YJLV22 — XLPE armoured aluminium cable
- Medium & high voltage XLPE cable
- LSZH power cable
- PVC building wire
- KVV — PVC control cable
Not sure which to specify?
Send us your load, length and voltage. Our engineers reply with a recommended cable and quote, after reviewing the specification.
